top of page
WIRELESS USER STATION WB-2P-LR2
Key benefits
  • 802.11b/g/n (2.4G Wi-Fi)  
  • MIMO 2x2
  • Power of the transmitter up to 26 dBm  
  • Integrated antenna 10,5 dBi  
  • РoЕ injector 24V
  • Reset button on the injector
WB-2P-LR2 is a high performance wireless user station designed for up-to-date high speed service provision via Wi-Fi technology.  
    Wireless connection
    WB-2P-LR2 is developed for connection to Wi-Fi access network which might be constructed using base stations within long distances.

    Performance 
    To ensure a stable and uninterrupted operation, the device is equipped with high-performance processors providing high routing rates and ensuring the effective operation of FBWA (Fixed Broadband Wireless Access) technology.

    WIRELESS USER STATION WB-2P-LR2

    ₹0.00Price
    Out of Stock

    •  

      Interfaces

      • 1 port of Ethernet 10/100/1000BASE-T (RJ-45)
      • Wi-Fi 2.4 GHz IEEE 802.11b/g/n

      WLAN

      • Support for IEEE  802.11b/g/n standards
      • Data aggregation, including A-MPDU (Tx/Rx) and А-MSDU (Rx)
      • WMM-based priorities and packet planning 
      • Access point detection  
      • Polling
      • Channel list limitation
      • Support for fixed center frequency  
      • Spectrum analyzer 
      • Support for wireless bridges (WDS)

      Security

      • Centralized authentication via RADIUS server (WPA/WPA2 Enterprise)
      • WPA/WPA2 encryption
      • 64/128/152-bit WEP encryption

      Network functions

      • VLAN Trunk 
      • Management VLAN
      • General VLAN
      • Transparent Mode
      • MVR
      • Static routing
      • Time synchronization via NTP
      • Wireless transparent bridge
      • PPPoE client
      • VLAN Mapping
      • Limiting the number of MAC addresses learned

      Configuring

      • Firmware update and configuration via DHCP-autoprovisioning, TR-069 

      • Remote management via Telnet, SSH 

      • Web interface 

      • SNMP (Monitoring) 

      Wireless interface parameters

      • Frequency range  2402–2482 MH

      • DSSS, CCK, BPSK, QPSK, 16QAM, 64QAM modulation 

      • MIMO 2x2

      • Integrated Realtek RTL8197FS Wi-Fi chip 

      • Bandwidth: 5, 10, 20, 40 MHz

      Operating channels1

      • 802.11b/g/n: 1–13 (2402–2482 MHz)

      Data rate2

      • 802.11b: up to 11 Mbps 

      • 802.11g: up to 54 Mbps 

      • 802.11n: up to 300 Mbps  

      Receiver sensitivity

      • 2.4 GHz: up to -98 dBm

      Maximum power of the transmitter1

      • 2.4 GHz: 26 dBm

      Antenna parameters

      • Antenna gain: 10,5 dBi
      • Linear polarization: H/V
      • SWR: 2.0 max
      • Beam width (H): 60°
      • Beam width (V): 40° 

      Physical specifications

      • Power consumption up to 9 W 

      • Realtek RTL8197FS 1 GHz processor 

      • RAM 128 MB 

      • Flash 32 MB 

      • Power supply: PoE 24 V

      • Operating temperature: -45°С to +65°С

      • Operating humidity: up to 95%
      • Dimensions (WхDхH): 80x66x282 mm
      • IP54 protection
      • Pole mounting
    bottom of page