top of page
WI-FI ENTERPRISE ACCESS POINT WEP-12AC
Key benefits
  • High-performance solution based on the Broadcom chipset 
  • Dual band Wi-Fi 802.11ac 
  • Power supply: PoE+ (IEEE 802.3at)
  • Cluster operations without dedicated server (up to 64 devices)
  • Seamless roaming
  • Up-to-date authentication and encryption means
 
Solution for enterprise
WEP-12ac provides high-performance, secure, accessible and easy to use wireless network that combines numerous features and services required by corporate clients.
WEP-12ac is a universal solution that may be used for organization of wireless networks in highly crowded areas and high traffic environments (offices, state institutions, conference halls, laboratories, hotels, etc.)
 
Wireless Connection
The WEP-12ac provides 1300 Mbps (5GHz) + 450 Mbps (2.4 GHz) data rate as it supports IEEE 802.11n/ac standards. Furthermore, the WEP-12ac supports MIMO technology and has omnidirectional antennas that makes it a universal solution for public networks organization.

Security
The WEP-12ac provides personal data protection and corporate environment security due to the support of up-to-date authentication technologies. Particularly, it uses a dynamic key that is unique for each active client.
 
Performance
The high-performance Broadcom processors these devices serve to provide reliability and high data processing  rates.  
 
Power Supply
The PoE+ technology makes the installation possible practically at any place regardless of the power supply location, thus allowing for cost economy on power cables and making the installation easier and faster.
When sequential connection method (point-to-point) is used, device should be powered with AC power adapter connected to the electrical network or separate power line.

WI-FI ENTERPRISE ACCESS POINT WEP-12AC

₹0.00Price
Out of Stock

  • Interfaces

    • 2 x Ethernet 10/100/1000Base-T (RJ-45)
    • Console (RJ-45)

    WLAN Capabilities

    • IEEE 802.11a/b/g/n/ac standards support
    • Data aggregation, including A-MPDU (Tx/Rx) and А-MSDU (Rx)
    • WMM-based packet priorities and planning
    • Dynamic frequency selection (DFS)
    • Hidden SSID support
    • 32 virtual access points
    • External access points detection
    • APSD support
    • WDS support

    Network features

    • Automatic speed negotiation, duplex mode negotiation, and MDI/MDI-X switch-over
    • VLAN support
    • 802.1X authentication support
    • DHCP client
    • IPv6 support
    • LLDP support
    • ACL support

    Cluster mode operation

    • Cluster creation with the capacity of up to 64 access points
    • Load balancing for multiple access points
    • Automatic synchronization of access points configurations in cluster
    • Single Management IP—single address for access points management in cluster
    • Automatic frequency channel allocation for multiple access points
    • Authentication via RADIUS server

    QoS functions

    • Profile-based packet priorities and planning 
    • Bandwidth restriction for each SSID
    • Modification of WMM parameters for each radio frequency interface

    Security

    • Centralized authorization via RADIUS server (WPA Enterprise)
    • WPA/WPA2 encryption
    • Captive Portal support
    • E-mail notifications about system events

    Wi-Fi Wireless Interface Specifications 

    • Frequency range: 2400–2480 MHz, 5150 – 5850 MHz
    • CCK, BPSK, QPSK, 16QAM, 64QAM, 256QAM modulations
    • Embedded dual-band antennas
    • 3х3 MIMO support 
    • Two embedded Broadcom BCM43460 chips (IEEE 802.11b/g/n/a/ac)

    Active channels

    • 802.11b/g/n: 1-13 (2412-2472 MHz)1         
    • 802.11 a/n/ac:                       
      • 36-64 (5180 - 5320 MHz)                         
      • 100-144 (5500 - 5720 MHz) 
      • 149-165 (5745 - 5825 MHz)1

    Data transfer rate2

    • 802.11n: 450 Mbps 
    • 802.11ac: 1300 Mbps

    Receiver sensitivity

    • 2.4 GHz: up to -98 dBm 
    • 5 GHz: up to -94 dBm  

    Maximum power of the transmitter

    • 2.4 GHz: up to 19 dBm1
    • 5 GHz: up to 19 dBm1

    Physical specifications  

    • Power consumption below 14W
    • Broadcom BCM53016/BCM58522 processor
    • 128 MB NAND Flash
    • 256 MB RAM DDR3
    • Power supply:
      • PoE+ 48V/54V (IEEE 802.3at-2009)
      • 12 V DC
    • Operating temperature from +5°C to 40°C
    • Dimensions (WхHхD): 224х42х235 mm

    Configuration

    • Software update and configuration via DHCP Autoprovisioning
    • Remote control via Telnet, SSH
    • Web interface
    • SNMP
bottom of page