Key features
- Bandwidth up to 640 GBPS
- Non-blocking architecture
- Up to 32x10G ports
- L3 switches
- Front-to-Back cooling
- Stacking up to 8 devices
- Hot-swappable redundant power supplies
MES5332A switches are high performance devices with 10GBASE-R/1000BASE-X that can be used as aggregation switches in carrier networks and small data centers.
The devices support operating bandwidth of 1 Gbps (SFP) and 10 Gbps (SFP+) that provides flexible using and ability of smooth transition to higher data rates. The non-blocking architecture guarantees lossless packet forwarding at high loads with minimum and predictable delays for all types of traffic.
The front-to-back cooling provides effective cooldown in modern data centers.
The redundant and hot-swappable fans and AC/DC power supplies with advanced hardware monitoring functions provide high reliability and uninterrupted services.
AGGREGATION 10G SWITCH MES5332A
Common parameters
- Packet processor - Marvell 98DX8332
- RAM (DDR3) - 1 GB
- ROM (NAND Flash) - 1 GB
Interfaces
- 1x10/100/1000BASE-T (ООВ)
- 32x10GBASE-R (SFP+)/1000BASE-X (SFP)
- Console port RS-232/RJ-45
Performance
- Bandwidth - 640 Gbps
- Troughoutput for 64 bytes - 238 MPPS
- Buffer memory - 3 MB
- MAC table - 32K
- VLAN table - 4K
- TCAM:
- For routing: 16K IPv4, 8K IPv6
- For traffic processing: 9K х 10В
- ARP table¹ - 32K
- L2 Multicast groups - 4K
- Quality of Service (QoS) - 8 egress queues per port
- Link Aggregation Groups (LAG) - 32, up to 8 ports per LAG
- Jumbo frames size - 10240 bytes
- Stacking - up to 8 devices
Interface functions
- Head-of-line blocking (HOL) protection
- Back pressure
- Auto MDI/MDIX
- Jumbo frames
- Flow control (IEEE 802.3X)
- Port Mirroring
- Stacking
MAC table functions
- Independent learning mode per VLAN
- MAC Multicast Support
- Configurable aging time of MAC addresses per VLAN
- Static MAC entries
VLAN functions
- Voice VLAN
- IEEE 802.1Q
- Q-in-Q
- Selective Q-in-Q2
- GVRP
L2 Multicast functions
- Multicast profiles2
- Static Multicast groups
- IGMP Snooping v1,2,3
- Port/host2-based IGMP Snooping Fast Leave
- IGMP authorization via RADIUS2
- MLD Snooping v1,2
- IGMP Querier
- MVR
L2 functions
- STP (Spanning Tree Protocol, IEEE 802.1d)
- RSTP (Rapid Spanning Tree Protocol, IEEE 802.1w)
- MSTP (Multiple Spanning Tree Protocol, IEEE 802.1s)
- STP Multiprocess2
- Spanning Tree Fast Link option
- EAPS2
- STP Root Guard
- BPDU Filtering
- STP BPDU Guard
- Looback Detection (LBD)
- ERPS (G.8032v2)2
L3 functions
- Static IP routes
- Dynamic routing protocols RIP, OSPFv2, OSPFv3
- Address Resolution Protocol (ARP)
- VRRP
- Multicast Dynamic routing protocols PIM SM, IGMP Proxy
Link Aggregation functions
- Static LAG
- Dynamic LAG (LACP)
- LAG Balancing Algorithm
Ipv6 functions
- IРv6 Host
- Dual-stack
Service functions
- Optical transceiver diagnostics
- Green Ethernet
Security functions
- DHCP Snooping
- DHCP Option 82
- IP Source Guard
- Dynamic ARP Inspection
- sFlow
- MAC-based authentication, Port Security, Static MAC entries
- Port-based authentication IEEE 802.1x
- Guest VLAN2
- DoS attack prevention
- Traffic segmentation
- DHCP clients filtering
- BPDU attack prevention
- NetBIOS/NetBEUI
- PPPoE Intermediate Agent2
ACL (Access Control List)
- L2-L3-L4 ACL
- Time-Based ACL
- IРv6 ACL
- ACL based on:
- Switch port
- IEEE 802.1p
- VLAN ID
- EtherType
- DSCP
- Protocol type
- TCP/UDP port number
- TCP/UDP port number
Quality of Service (QoS)
- CoS statistics
- Shaping, Policing
- IEEE 802.1р Class of Service (Cos)
- Storm Control
- Bandwidth management
- Strict Priority/Weighted Round Robin (WRR)
- Three marking colors
- ACL-based traffic classification
OAM/CFM2
- IEEE 802.3ah Ethernet Link OAM
- Dying Gasp
- IEEE 802.1ag Connectivity Fault Management (CFM)
- IEEE 802.3ah Unidirectional Link Detection
Data Center Bridging (DCB) functions2
- IEEE 802.1Qau Congestion Notification (QCN)
- IEEE 802.1Qaz Enhanced Transmission Selection (ETS)
- IEEE 802.1Qbb Priority-Based Flow Control (PFC)
- Cut-through switching
Management functions
- Download and upload of configuration and firmware file via TFTP
- SNMP
- Command Line Interface (CLI)
- Syslog
- SNTP (Simple Network Time Protocol)
- Traceroute
- LLDP (IEEE 802.1ab)
- Access control – privilege levels
- Management ACL
- Management interface blocking
- Local authentication
- IP addresses filtering for SNMP
- RADIUS/TACACS+ (Terminal Access Controller Access Control System) client
- SSH server
- SSL
- Macrocommands
- CLI commands logging2
- System log
- DHCP autoprovision
- DHCP Relay (IPv4 support)
- DHCP Option 12
- Flash File System
- Debugging commands
- Rate limit of traffic to CPU
- Password encryption
Password recovery - Ping (IPv4/IPv6)
- FTP server2
Monitoring functions
- Interface statistics RMON/SMON
- CPU utilization monitoring per task and per traffic typeRAM utilization monitoring2
- Temperature monitoring
- TCAM utilization monitoring
MIB
- RFC 1065, 1066, 1155, 1156, 2578 MIB Structure
- RFC 1212 Concise MIB Definitions
- RFC 1213 MIB II
- RFC 1215 MIB Traps Convention
- RFC 1493, 4188 Bridge MIB
- RFC 1157, 2571-2576 SNMP MIB
- RFC 1901-1908, 3418, 3636, 1442, 2578 SNMPv2 MIB
- RFC 271, 1757, 2819 RMON MIB
- RFC 2465 IPv6 MIB
- RFC 2466 ICMPv6 MIB
- RFC 2737 Entity MIB
- RFC 4293 IPv6 SNMP Mgmt Interface MIB
- Private MIB
- RFC 3289 DIFFSERV MIB
- RFC 2021 RMONv2 MIB
- RFC 1398, 1643, 1650, 2358, 2665, 3635 Ether-like MIB
- RFC 2668 IEEE 802.3 MAU MIB
- RFC 2674, 4363 IEEE 802.1p MIB
- RFC 2233, 2863 IF MIB
- RFC 2618 RADIUS Authentication Client MIB
- RFC 4022 MIB for TCP
- RFC 4113 MIB for UDP
- RFC 3298 MIB for Diffserv
- RFC 2620 RADIUS Accounting Client MIB
- RFC 2925 Ping & Traceroute MIB
- RFC 768 UDP
- RFC 791 IP
- RFC 792 ICMPv4
- RFC 2463, 4443 ICMPv6
- RFC 4884 Extended ICMP for Multi-Part messages support
- RFC 793 TCP
- RFC 2474, 3260 DS field in the IPv4 and IPv6 header
- RFC 1321, 2284, 2865, 3580, 3748 Extensible Authentication Protocol (EAP)
- RFC 2571-2574 SNMP
- RFC 826 ARP
Physical features
- Power supply:
- AC power: 220V+-20%, 50 Hz
- DC power: -36..-72V
- Power supply options:
- 1 AC/DC power supply
- 2 AC/DC hot-swappable power supplies
- Max. power consumption - 57 W
- Operating temperature - from -10 to +45°С
- Storage temperature - from -40 to +70°С
- Operating humidity - 80% max
- Cooling - Front-to-Back, 4 fans
- Dimensions (WxDxH), mm - 430х275х44 mm
- Weight - 3.6 kg